Installing a standalone bathtub will undoubtedly enhance the visual aesthetics of your bathroom. But keeping it well-maintained is another responsibility that you would have to take to retain the appeal. So, today we will discuss how you can do the same to keep your bathroom in Perth look enticing at all times.

Now, without further ado, let us take a look into what you need to do to keep your bathtub in the best shape.

Keep the Dust and Dirt Off

Considering the standalone bathtub in Perth is white, it might start looking dull when it’s not in use due to dust and dirt. So, keeping them off of their surface is something that you need to do regularly. For this, you can use a damp cloth to wipe the surface. But don’t use a vacuum cleaner since it might not be able to remove the dust fully since humidity keeps the dust particles adhered to the surface.

Don’t Use Any and Every Cleaner

Cleaning your bathtub with a cleaning agent might seem tempting. But using any of them can harm the surface of the tub. So, either avoid them or talk to professionals regarding the solution that will help in cleaning the surface without damaging it.

Cleaning the Bathtub With Bath Oils is Helpful

Since bath oils are greasy, they help in preventing the accumulation of grime or sediments on the surface of the bathtub. Most bath oils work. However, to retain the shine, you can use those that are recommended by the manufacturer or the installers.

Let the Bathtub Dry After Cleaning Them

After cleaning the freestanding bath in Perth, you should let it dry before you can use it again. This will help in preventing the growth of mould on the surface.

A good habit is cleaning the bathtub after using it each time and letting it dry completely before it can be used again.

Remove Stains with Bleach and Water

You can remove stains from the surface of the bathtubs by applying bleach combined with water.

Apply this solution on the stained area with a soft damp cloth and wait for ten minutes to see them completely removed. But make sure that you do not use harsh agents to remove the stains as they might damage the smooth surface of the bathtub.

Beware of Hot Water Damage

Repeated application of water with an increased temperature might damage the high-quality bathtub in your Perth bathroom. So, to prevent surface damages, you should follow the manufacturer guidelines. Also, drain the water inside the tub after use to prevent the growth of mould that takes place due to moisture.

Use Sandpaper to Remove Scratches Taking Precautions

To remove tough stains or smudges, you can use sandpaper. However, this might not suit all types of freestanding baths. So, following manufacturers’ guidelines is necessary. But if your bathtub is old and looks dull, you can try out gentle sandpaper scrubbing to restore the lustre.

These were some of the basic guidelines of bathtub maintenance. So, follow these points to extend the longevity of this bathroom accessory.

Buy High-Quality Cost-Effective Bathtubs

To buy your favourite bathtub from Bath Station, visit our website. Here, you can find the cost of each bathtub listed. So, choosing the one according to your budget will be easy.